Roofing contractor London. Services for period, historic and listed building restorations
London Stonemasonry restores the roofs of period and historic buildings across London. Our roofing division re-slates pitched roofs, renews lead box gutters, flashings and flat roofs, and re-covers mansards, dormers and turrets in lead. Our experts have rebuilt the bay roofs, portico roofs and parapets of many Georgian, Victorian and Edwardian properties.
We work on roofs of all sizes, from re-leading the roof of a single bay window on a terraced street, to stripping and rebuilding the roof of a Grade II listed crown court for a national main contractor. Also, because we are stonemasons as well as roofers, we can restore historic roofs and facade masonry in the same cost-effective programme.

Pictured: The renewed hipped slate roof of the Grade 2 listed Clock House on Defiance Walk, Woolwich Dockyard SE18. London Stonemasonry re-covered the slopes in natural slate, clad the dormers in lead, and more
On this page: Our roofing services for period and historic buildings
We often work for / with:
- Owners of period London houses
- Landlords and managing agents
- Architects and surveyors
- Conservation officers
- Main contractors
- Facilities managers

Pictured: A hipped bay window roof in diamond cut Welsh Penrhyn slate, with lead ridge rolls over the hips and a stepped lead flashing let into the brickwork, by London Stonemasonry
Access and scaffolding
We arrange the access a historic roof needs: full scaffold with a temporary roof for long programmes, perimeter and chimney scaffolds, towers and platforms for inspections and smaller repairs, hoists for materials, and the licences a scaffold on a London pavement requires. Scaffold ties are placed to protect stucco, stone and ironwork, and on a shared terrace we will tell you when a neighbour’s roof could sensibly share the scaffold.
For example: On Belle Vue Road, on a busy stretch by Wandsworth Common, we cleared the dismantled parapet and cornice early in the morning with an electric hoist and construction trolleys to a truck on a quieter street, and brought the new cast stone in the same way.
Storm damage and insurance claims
Storms, high winds and falling branches find the weak points in a historic roof: lifted flashings, slipped slates, split lead and blocked outlets.
We make roofs safe and weathertight, carry out the permanent repair, and provide the photographic record and report an insurer or loss adjuster needs.
Our stonework team already works through buildings insurance claims and the same process applies.
Bay window roofs, portico roofs and canopies
We rebuild and re-cover the small roofs that period London houses depend on: the lead or slate roof over a bay window, the lead roof of a portico or door canopy, and the lead cappings over cornices. Our team builds the timber roof over joists in the traditional way, boards it in marine plywood and lead-lines it to form a shallow waterproof well, tucks the leadwork under the parapet stones and into the facade brickwork, and forms a working rainwater outlet. Where a pitched roof suits the bay we slate it instead. Because the stonework and the roof are done by one firm, nothing falls between two trades.
For example: At Friern Road in East Dulwich SE22, after underpinning and rebuilding the bay in carved Bath stone, we installed the new bay roof, lead-lined over marine plywood with the leadwork tucked under the new parapet stones and an outlet to drain the well.
For the stonework side of bay windows see our bay window restoration page.

Pictured: Restored bay window roof, Friern Road, Dulwich SE22 – by London Stonemasonry
Box gutters, parapet gutters, valleys and secret gutters
We re-line and rebuild the gutters hidden within historic roofs: box gutters behind parapets, parapet gutters, tapered valley gutters between slopes, the central valley of an M-shaped Georgian roof, and secret gutters at abutments.
Our team strips the old lining to the boards, corrects the falls, re-lines in heavy-code lead with drips at the right spacing, forms sumps, outlets and overflows, and ventilates the gutter so moisture under the lead can escape.
A blocked outlet or a split box gutter behind a parapet does more damage to a London building than almost any other roof fault, because the water goes into the wall rather than off it.
Lead flashings, soakers and chimney flashing repair
We renew and repair lead flashings: cover flashings and stepped flashings at walls, apron flashings at the head of a roof slope, soakers under slates at abutments, and the back gutters, stepped flashings and aprons that weather a chimney stack where it passes through the roof.
Flashings are the usual point of failure on a period roof because they are the joint between two materials that move differently. When they lift, split or were never dressed properly, water runs down the inside of the wall and shows itself as a damp patch at a chimney breast or a window head.
We also repair the brickwork, repointing and flaunching of the chimney stack itself, so a leaking stack is dealt with once rather than by a roofer and a bricklayer in turn.
Cast iron guttering, downpipes and lead hoppers
We repair and replace the “rainwater goods” on period buildings: cast iron ogee and half-round gutters, cast iron downpipes, and lead or cast rainwater hoppers, including bespoke hopper heads made to a pattern.
Where a design has no external gutter at all, as on many Victorian bays, we can form a leaded gutter within the stone cornice so the water is carried off without a pipe on the face of the building.
Undersized or blocked rainwater goods are a common root of saturated brickwork and failed parapets, so we check the falls, outlets and capacity as part of every roof survey.
For example: At William Lock’s Norbury Park House (Grade II* listed), our leadwork included bespoke lead hopper heads cast with the date 1781, alongside plain box hoppers and downpipes.

Pictured: A lead hopper head dated 1781 in raised numerals, with a rolled top edge, a flared lower section and a small overflow spout, fixed to the rusticated render of Norbury Park near Dorking
Lead mansards, dormers, turrets and domes
We re-cover mansard roofs, dormers and turrets in lead.
Our team clads mansard faces and curbs in lead sheet with rolls, forms lead dormer roofs and cheeks, builds barrel vaulted and flat-topped dormers, and dresses lead over the curved and ogee domes of turrets and cupolas (each panel bossed and clipped to the shape beneath it!).
More often than not, mansards and dormers on London terraces sit in conservation areas and beside listed neighbours, so the detailing has to satisfy a conservation officer as well as the weather.

Pictured: Three lead dormers on the lead mansard roof of a stucco house at Chester Square in Belgravia SW1W. Leadwork by London Stonemasonry
Lead roofing and leadwork
We craft traditional leadwork on historic roofs. Including: lead box gutters, valleys, hips and cappings, flashings and soakers, cornice details, flat lead roofs with wood-cored rolls, and bespoke hopper heads.
A great deal of the failed leadwork we are asked to replace was laid in a code too thin for the job, in bays too long for the code, or without the drips and laps that let lead move with the temperature.
For example: At Snaresbrook Crown Court the earlier box gutters had been laid in the wrong code and not to the lead sheet standards, which is why a roof under 20 years old was letting water into a listed building. We stripped the gutters to the gutter boards and rebuilt them with Code 8 lead to the valleys, hips and cappings and Code 7 to the flashings and cornice detail, with welded joints and Airtrak ventilators in the gutters. A lead box gutter built this way should last over 50 years.

Pictured: The roof of Snaresbrook Crown Court stripped back to the rafters and covered in Tyvek breathable membrane, with the new lead box gutter at its base, during London Stonemasonry’s re-roofing in Snaresbrook E11
Parapets, copings, cornices and Dutch gables
We also repair the masonry a historic roof meets: parapet walls and copings, cornices, Dutch gables and pediments.
Our team takes down and rebuilds moving parapets with lateral restraint ties, replaces cornice sections in natural or cast stone from templates of the original, re-beds and weathers copings, and dresses lead cappings over copings and gable pediments.
A parapet that leans or a cornice that has moved forward is nearly always a roof problem first: water from a failed gutter lining or a neglected roof has rotted the wall plate and corbels behind it.
For example: In Maida Vale W9 our team dressed curved lead cappings over the coping and pediment of a rendered Dutch gable for Bourne Construction.

Pictured: Curved lead cappings to a rendered Dutch gable in Maida Vale W9, carried out for Bourne Construction.
Roof structure, ventilation and breathable underlay
Roofs require ventilation. We repair the timber structure of historic roofs and build in the ventilation they need. Our team replaces or splices decayed rafters, purlins and wall plates, deals with roof spread where ties have failed, installs steel where an engineer specifies it, and corrects sagging where it is structural rather than historic character.
Every roof we re-cover is ventilated: at the eaves and ridge on a cold roof, within box gutters and under lead, so the interstitial condensation that forms in an insulated period roof can escape rather than rot the timbers or corrode the lead. These days, a vapour permeable underlay takes the place of the bituminous felt or lime torching found on older roofs.
For example: At our Snaresbrook project, the rafters were covered with a Tyvek breathable membrane before slating, with Airtrak ventilation at the gutters and ridges to control condensation.

Pictured: The “tabletop” lead flat that caps the hipped roof of the Clock House in Woolwich SE18, laid in bays divided by lead rolls, with a lead-clad vent upstand and mesh grille rising from the surface. London Stonemasonry laid the flat as part of the slate and lead roof renewal
Roof surveys, leak detection and condition reports
Every job starts with a survey of the roof and the masonry it meets: the coverings, the leadwork and its code, the gutters, outlets and falls, the parapets, cornices and chimneys, the structure from within the roof space, and where water has been getting in. We inspect from ladders, scaffold or a platform as the building demands, trace leaks to their source rather than to where they show, and record everything in photographs. You receive a plain report that says what is urgent, what is necessary and what can wait, with an itemised price for each, and where a listed building consent application or an insurer needs a report we write it to suit.
For example: At Snaresbrook we were invited to site to measure the whole project before pricing, and the phased orders followed from that. At Friern Road our report to the homeowner proposed the steel bressummer and the sequence of underpinning, rebuilding and re-roofing. At Barrow Road every architectural detail of the portico was templated before removal so the replacement would match.

Pictured: Welsh Penrhyn slate pitches meeting at new lead valleys on the roof of Grade 2 listed Snaresbrook Crown Court in Snaresbrook E11, re-roofed by London Stonemasonry’s roofing division
Roofing services for main contractors, architects and managing agents
We work as a roofing and leadwork subcontractor to main contractors and facilities management firms, and direct to architects, surveyors and managing agents.
We price from a full site measure, work to the specification and programme, provide method statements and risk assessments, phase the work so the building stays in use, keep it weathertight overnight, and liaise with residents and building users.
On residential jobs we regularly work alongside the builder renovating the rest of the house and alongside window installers.

Pictured: A lead barrel vaulted dormer at St Katharine Docks E1, photographed from the scaffold boards as the roof around it was being re-covered by London Stonemasonry’s roofing division
Slate roof restoration and re-slating
We restore and replace slate roofs on historic buildings and period houses. Our team strips the old covering, inspects and repairs the rafters, battens and wall plates.
We lay breathable membranes, fit ventilation at eaves, gutters and ridges, and re-slate in natural Welsh slate fixed with copper nails, with lead to the hips, ridges and abutments.
Where only part of a roof has failed we re-slate that section and match it to the rest, sorting and re-using sound slates where the specification allows.
A well built and fitted natural slate roof should last around 75 years and often longer.
In our experience the roofs that fail early are often let down by the fixings, the slating or the leadwork beneath them, not by the slate. In the trade, we call it “nail sickness” – when iron and galvanised nails rust through and the slates slip.

Pictured: A newly laid natural slate pitch at Norbury Park near Dorking, with a clipped lead hip roll running down to a lead box gutter and a lead covered parapet coping finished with rolls, by our roofing division
Specialist services for listed buildings, conservation areas and estate approvals
We work on listed buildings and in conservation areas, and we build to the standards those settings call for: original materials, natural slate and sheet lead, leadwork detailed to the Lead Sheet Training Academy’s guidance, and the specification agreed between the client, the architect and the conservation officer.
Works that affect the character of a listed building need listed building consent, and that can include re-roofing in a different material or altering a mansard.
In a conservation area a new or rebuilt mansard usually needs planning permission, and on estate land such as Grosvenor’s Belgravia the estate’s own approval is needed too. The Grosvenor Specification, for example, asks for Code 5 lead as a minimum on flat roofs and samples of roofing materials for approval.
Re-covering a roof can also trigger Building Regulations requirements on insulation, with relaxations for listed buildings.
We advise on all of this (where possible) at survey stage rather than after the scaffold is up, record the roof before we strip it, and work to the conservation principle of minimum intervention and like-for-like repair.

Pictured: One of the two ogee turret domes at Snaresbrook Crown Court in Snaresbrook E11, newly re-covered in lead by London Stonemasonry (inside the scaffold sheeting)
Contact us: Speak to us about restoring a historic roof in London
London Stonemasonry is one of London’s leading specialists in historic roof restoration in slate and lead, from Victorian bay roofs on terraced houses to the roofs of Georgian and Victorian listed buildings. If your roof, box gutters, mansard or parapet is letting water in, or a conservation officer has asked for like-for-like materials, send us photographs or ask for a survey. Contact us and we will tell you plainly what the roof needs.
Example review: Our roofing and stonework is highly recommended
Sarah, whose Victorian terrace at Quick Road in Chiswick W4 we restored, rebuilding the bay window and finishing it with a slate roof, said the added bonus of using London Stonemasonry was that our team “could handle all aspects of the renovation”, including “re-roofing the structure and making good inside my home.”
Read about the Quick Road project and read more reviews from our clients.
Frequently asked questions about historic roof restoration

Pictured: A lead flat roof with wood-cored rolls at Norbury Park in Surrey, with the slate roof and the glazed conservatory dome beyond, part of London Stonemasonry’s leadwork at the house